Do you have a licensed electrician available?

Yes. VGV Services has licensed Missouri electricians on our team. If your project requires a licensed electrician on site, we can assign one. Proof of license available on request.

Yes. For any work that requires a permit, we coordinate with the building department, pull the permit, schedule the inspection, and include the fee in writing.

Electrician in Bowling Green, MO | Licensed Residential & Commercial

Q: Do you offer free estimates?

Yes — written estimates are free. We quote most jobs from a conversation, photos, and scope details. If your project needs an in-person site visit, there is a flat $50 site visit fee.

Q: Do you work on older homes with aluminum wiring or Federal Pacific panels?

Yes. We bring legacy wiring up to NEC code with aluminum-to-copper pigtails and modern panel replacements, with documentation for insurance.

Q: How quickly can you respond in an emergency?

For active danger (fire, smoke, sparks, shock) call 911 first, then 636-324-3474. For urgent-but-safe issues, we aim for same-week service, often sooner.

Q: What payment methods do you accept?

Check, cash, and major credit cards. Larger commercial projects can be invoiced net-30 with a signed work order.

Q: Do you warranty your work?

Yes. Workmanship is warrantied. Manufacturer warranties on parts follow whatever the manufacturer provides.

About VGV Services

VGV Services is a locally owned electrical contractor in Bowling Green, Missouri, run by electrician John Wright. We bring 16+ years of hands-on residential and commercial experience to homes, farms, rental properties, and small businesses across Pike County and Northeast Missouri.

From a flickering panel in a farmhouse to a full LED retrofit for a Main Street storefront, we do the work ourselves — no subcontracting. Panel upgrades and service mast replacements, new circuits and remodels, EV charger installs, electrical repairs and troubleshooting, structured cabling, and security cameras. If it runs on 110V–480V, we handle it.

Every job is done to NEC code and applicable local requirements, with clean documentation of the work we performed and the materials we used. We pull the permits when a job needs them, leave the site cleaner than we found it, and stand behind our workmanship.

Need an electrician you can actually reach? Call 636-324-3474 or request a free estimate and we'll get back to you within one business day.

            16+
            Years Experience
          

            110-480v
            Full Range Service
          

            NEC
            Code Compliant
          

            7/7
            Days Available
          

Services

Comprehensive electrical solutions for commercial and residential needs

Problems We Solve

Real scenarios, real resolutions. Click a category to see how we diagnose and fix the issues that matter to homeowners, landlords, and local businesses.

Licensed electrician working on a residential breaker panel

Residential Homes

Older farmhouses, modern subdivisions, EV-ready upgrades — we bring 16+ years of residential electrical work to every home we serve across Northeast Missouri.

Panel meltdown in a 1960s farmhouse

The problem: Homeowner smelled burning plastic near the panel room and was losing power randomly.
What we found: Original Federal Pacific Stab-Lok panel with aluminum branch wiring, burned lugs, and scorched insulation on the feeder.
What we did: Full 200A panel replacement, new service mast, AFCI/GFCI breakers, aluminum-to-copper pigtails at every device, and grounding brought up to current NEC.
Outcome: Home insurance renewed at a lower premium, zero trips in 18 months, and a family of four sleeping better.

Pool equipment tripping in summer storms

The problem: Pool pump and heater tripped every time a thunderstorm rolled through — sometimes requiring manual reset at 2 a.m.
What we found: Outdoor subpanel had a failed GFCI, a degraded grounding electrode, and no surge protection anywhere in the system.
What we did: Replaced the outdoor subpanel with a NEMA 3R enclosure, installed fresh GFCI protection, added whole-home surge protection at the main, and drove a new code-compliant grounding electrode.
Outcome: Pool equipment rides out storms without manual intervention. Homeowner saved roughly $600/yr in pool-service callouts.

EV charger install on a maxed-out panel

The problem: Family bought their first EV and wanted a Level 2 charger, but the 100A panel was already full with central AC and an electric dryer.
What we found: Load calculation confirmed the existing 100A service couldn't support a 48A charger, and there was no physical room for another double-pole breaker.
What we did: Upgraded service to 200A, installed a modern panel with headroom, and ran a dedicated 60A circuit to the garage for a hardwired Level 2 charger.
Outcome: Overnight charging with no load-shedding, plus headroom for a future heat pump or solar tie-in.

Electrician installing a new panel in a rental property laundry room

Rental Properties

Duplexes, multi-unit apartments, short-term rentals — landlords call us when they need code-compliant work done fast, with minimal disruption to tenants and a paper trail for inspectors.

Duplex with cross-unit breaker trips

The problem: Owner of a Louisiana, MO duplex had two tenants complaining that running the vacuum in one unit would trip the kitchen breaker in the OTHER unit.
What we found: Panel had shared neutrals between units (illegal multi-wire branch circuits), mis-labeled breakers, and one unit's refrigerator fed from the wrong meter entirely.
What we did: Separated the units into fully independent circuits, tied each tenant's load to the correct meter, re-labeled the directory, and added AFCI protection per current code.
Outcome: Zero cross-unit trips since. Landlord avoided lost-rent complaints and passed the next city inspection without notes.

12-unit panel swap before city inspection

The problem: Property manager had 30 days before a mandatory inspection across 12 units — all with original FPE panels flagged as non-compliant.
What we found: Every panel needed replacement. Several also had missing GFCI in kitchens and baths, and undersized service entrances.
What we did: Coordinated overnight swaps so each tenant lost power for only 3–4 hours. Replaced panels, added GFCI/AFCI per the current code cycle, and updated meter bases where required.
Outcome: All 12 units passed inspection the same week. Property manager's rental license was renewed for 2 years.

Short-term rental flagged for safety

The problem: Airbnb host received a platform warning after a guest reported "sparking outlets." Unit had 1970s wiring with two-prong receptacles throughout.
What we found: Grounding was missing on half the circuits, several receptacles were reverse-polarity, and there was no GFCI protection in the bathroom or kitchen.
What we did: Installed grounded receptacles, added GFCI protection in wet areas, corrected polarity everywhere, and tested and labeled every circuit with a report for the host's records.
Outcome: Listing cleared the platform's safety re-review the next week. Host booked it at a higher rate thanks to the updated listing description.

Small Main Street storefront being re-lit with modern LED fixtures

Small & Medium Business

Storefronts, salons, restaurants, shops — local businesses rely on us for panel capacity, LED retrofits, dedicated equipment circuits, and inspection-ready documentation.

Hardware store tripping every Friday at 4

The problem: 80-year-old Bowling Green hardware store tripped like clockwork every Friday afternoon when their paint-mixer, welder, and saw were all running at once.
What we found: Service entrance was badly undersized for modern equipment. Several heavy tools were piggybacked off a single 30A breaker.
What we did: Upgraded to 400A three-phase where the shop needed it, re-fed each heavy tool on its own dedicated circuit, and installed a demand meter so the owner could see the load in real time.
Outcome: Zero trips since. Owner later added a second compressor without needing another call-out.

Hair salon adding 6 new styling stations

The problem: Salon expansion needed six new stations, each with a dedicated outlet for a high-wattage blow-dryer plus a straightener. Existing wall outlets were daisy-chained off one 15A circuit.
What we found: Existing wiring couldn't handle even two stations running blow-dryers simultaneously, and there was no GFCI protection in the shampoo area.
What we did: Ran six new dedicated 20A circuits, each with GFCI protection. Installed USB-integrated receptacles at each station and cleaned up the shampoo-area panel.
Outcome: All six stations run simultaneously during peak hours. Salon opened on its advertised grand-opening date.

Restaurant can't get its Certificate of Occupancy

The problem: New restaurant was being held up by the city — hood exhaust fan and walk-in freezer kept tripping the same panel.
What we found: Both heavy loads were sharing a single 20A circuit (a code violation), and the walk-in compressor's inrush was tripping the hood fan.
What we did: Separate dedicated 30A circuits for each, with a soft-start on the freezer compressor. Properly wired disconnects and inspection tags.
Outcome: Certificate of Occupancy issued the next day. Two years later, still no equipment trips.

Experience

May 2009 – Present

Electrician — Commercial and Residential

Private-Gov. Contractor · Full-time

16+ years providing comprehensive electrical services including custom design, smart building systems, structured cabling, LED installations, commercial remodels, and nationwide rollouts. All work performed by our team in accordance with approved plans, work orders, NEC requirements, and applicable local codes.

Dec 2016 – Feb 2019

Electrician

Solid Rock MEP · Full-time · O'Fallon, MO

Residential electrical installation during rough-in and finished conditions. Installed standard residential features including switches, receptacles, LED lighting, kitchen equipment, 220/240v appliance wiring, emergency lighting, and smoke detectors.

Jul 2014 – May 2016

Electrician — Electrical Break & Repair (EBR / LRM)

Rogers Electric · Full-time · Saint Louis, MO

Commercial remodels, resets, improvements, and nationwide rollouts. Lighting Route Maintenance, relamp and retrofit projects, structured wiring, and on-call EBR service for commercial and enterprise customers.

Availability

Hours of Operation

Open 7 Days

8:00 AM – 7:00 PM

Scheduling

Same-week when we can

Call to check today's availability

Service Area

Bowling Green, MO

& Northeast Missouri

What affects your quote

We give honest, documented estimates. Here's what moves the number up or down on a typical electrical job.

Property age & wiring

Older panels and aluminum wiring take more time to do safely and to code.

Scope & complexity

A dedicated circuit is an hour. A panel swap with new service is a day. We price each honestly.

Access & parking

Crawl spaces, attics, long conduit runs, and tight service areas add labor hours.

Permits & inspections

Some work requires city permits and inspections. We pull them and include the fee in writing.

Urgency & timeline

Standard appointment vs. after-hours or emergency service. We'll quote both if it applies.

Frequently Asked Questions

Do you offer free estimates?

Yes — written estimates are free. We can quote most jobs from a conversation, photos, and scope details shared through the Request a Quote chat or by phone at 636-324-3474. If your project needs an in-person site visit to measure or inspect before we can quote accurately, there's a flat $50 site visit fee.

Do you work on older homes with aluminum wiring or Federal Pacific panels?

Yes — it's some of the most common work we do. We bring legacy wiring up to NEC code with aluminum-to-copper pigtails and modern panel replacements, and we document the work for your insurance company.

How quickly can you respond in an emergency?

For active danger (fire, smoke, sparks, shock), call 911 first, then call us at 636-324-3474. For urgent-but-safe issues, we do our best to get someone on site within the same business week — sometimes sooner.

Do you pull permits for me?

Yes. For any work that requires a permit, we coordinate with the local building department, pull the permit, schedule the inspection, and include the fee in writing with your estimate.

What payment methods do you accept?

Check, cash, and most major credit cards. For larger commercial projects we can set up a standard net-30 invoice with a signed work order.

Do you warranty your work?

Yes. Workmanship is warrantied and we stand behind every install. Manufacturer warranties on parts follow whatever the manufacturer provides — we'll point you at the paperwork on delivery.

Get in Touch

Free estimates. Call, send a message, or get a fast quote from our AI estimator — we reply within one business day.

Call 636-324-3474

VGV Services

Owner-operated by electrician John Wright · Residential & Commercial

Phone

636-324-3474

Location

Bowling Green, Missouri & Northeast Missouri

Availability

Open 7 days · 8 AM – 7 PM

Call to check today's availability — we aim for same-week service

Name

Email

Phone

Service Needed

Message (optional)

Prefer to talk? Call 636-324-3474.

Service Areas

Electrician serving communities along the Highway 54 & Highway 61 corridors in Northeast Missouri

About VGV Services

Services

Electrical Design & Wiring

LED & Lighting Systems

Structured Cabling

Repairs & Troubleshooting

Commercial Remodels & Rollouts

Security Systems & Cameras

Problems We Solve

Residential Homes

Panel meltdown in a 1960s farmhouse

Pool equipment tripping in summer storms

EV charger install on a maxed-out panel

Rental Properties

Duplex with cross-unit breaker trips

12-unit panel swap before city inspection

Short-term rental flagged for safety

Small & Medium Business

Hardware store tripping every Friday at 4

Hair salon adding 6 new styling stations

Restaurant can't get its Certificate of Occupancy

Experience

Electrician — Commercial and Residential

Electrician

Electrician — Electrical Break & Repair (EBR / LRM)

Availability

Hours of Operation

Scheduling

Service Area

What affects your quote

Property age & wiring

Scope & complexity

Access & parking

Permits & inspections

Urgency & timeline

Frequently Asked Questions

Get in Touch

VGV Services

Phone

Location

Availability

Service Areas

Bowling Green, MO

Louisiana, MO

Hannibal, MO

New London, MO

Mexico, MO

Vandalia, MO

Curryville, MO

Frankford, MO

Eolia, MO

Clarksville, MO

New Hartford, MO

Center, MO

Elsberry, MO

Winfield, MO

Foley, MO

Silex, MO

Troy, MO

Old Monroe, MO

Moscow Mills, MO

Wentzville, MO

Wellsville, MO

Laddonia, MO

Farber, MO